LVP40X User Manual
www.videowall.cn
25
Item No. 19: “Input vertical start”
Figure 4-19
In this item, user can Press
“
Mode0” “Mode1” “Mode2” to select “Save
mode of current setup”;
Press
“
Out1” “Out2” “Out3” “Out4” to select
“DVI output port for current setup”; Press “knob” to select “New value” ,
when the value you desire appears, Press “Enter” to save the setting,
Press “Step” to select “Step value for number setup” .
As above example shows, Press “Mode0” to select Save mode of current
setup= Mode0;
Press “Out1” to select DVI output port for current setup=Out1, set Input
vertical start =0;
Press “Out2” to select DVI output port for current setup=Out2, set Input
vertical start =0;
Press “Out3” to select DVI output port for current setup=Out3, set Input
vertical start =540;
Press “Out4” to select DVI output port for current setup=Out4, set Input
vertical start =540;
Item No. 20: “
Output horizontal width
”
Figure 4-20
