LedSync850M Quick guide
Address:5B, building C,building C,Nanshan Hi-tech park,Nanshan District,Shenzhen City,
Website:www.videowall.cn TEL
：
+86-755-2675 0210 FAX
：
+86-755-2675 0185
Step 1: sending card installation
The sending card of LED display can be installed in the desktop computer's PCI slot and they
can also be installed in the LedSync850M chassis inside.
The method is as below.
1) Turn off the LedSync850M power supply and unplug the power cord
2) Open the LedSync850M cover, remove the baffle of the sending card.
3) Unscrew the hexagonal setscrew of sending card and remove the sending card baffle.
4) Install sending card in the LedSync850M mounting position and tighten the screws
5) Connect sending card + 5V power supply cable, install the LedSync850M cover
Step 2: connect input and output signals.
1)Turn off the power of all signal source devices.
2) Connect the output signals from video sources to corresponding video input ports of
LedSync850M, for example:
Connect DVI output from PC to DVI input of LedSync850M
Connect Video output from camera to V1 input of LedSync850M
3) Connect DVI output of LedSync850M to DVI input of sending card
4) Connect sending card RJ45 cables to LED receiving cards
5) Connect LVP615 VGA output to LCD display(used as monitor).
Step 3:
Connect power and power on
1) Make sure all input and output connection correct
2)Connect power to LVP615 and turn on it.
3) Power on the video source devices.
USB
1 U-disk input port
