VDW nuve DirectFREEZE DF 290, Инструкция по эксплуатации

Страница: 10 / 28

10
HANDLING AND TRANSPORTATION
All handling and transportation must be carried out by using proper equipment and experienced
staff. The instrument must be supported underneath, moved in vertical position and never be
turned upside down.
UNPACKING
Remove the cardboard box packing and ensure that no damage has occurred during
transportation. Remove the second nylon wrapping around the instrument. The below
mentioned are provided with the instrument, please check them;

1 ea. user’s manual and warranty

1 ea. power switch key

2 ea. door handle key
MAINS SUPPLY
The instrument requires 230 V, 50 Hz.
Please make sure that the supplied mains matches the required power ratings which are written
on the name plate of the instrument located at the back of the instrument.
Always plug-in the instrument to correctly grounded sockets.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of isolation fault.
POSITIONING

Check that the positioning is suitable for the users.

Check that the instrument is stable on its four feet.

Check that the user will be able to follow up the operation even when he deals with
something else.

Check that the positioning of the device prevents interference with other equipment in the
near surrounding.

Ensure that the instrument is not exposed to sunlight directly.

Leave at least 30 cm free space between the device and wall due to ventilation of
compressor.