OPERATING
The programming of the transmitters is done by pressing the "Prog" button for 2sec,
the buzzer will then issue a first sound pulse, and thereafter each time you press a
button the remote control you will have a sound pulse to indicate a successful store.
The control panel automatically exits the programming mode after 6 seconds of
inactivity (action signaled by two sound pulses) For the use of both relays follow the
indication of OPTION 1
For reset all codes you press "Prog" button for 6 sec, after 2 sec you listen a slow
bip and after 4 sec to fast bip. Now all codes are reseted.
The control panel automatically exits the programming mode after 6 seconds of
inactivity (action signaled by two sound pulses).
SELECT OPTIONS BY DIP-SWITCH
1 2 3 4
ON
DIP 1TX CHANNELS ASSOCIATION\RELAY
ON
The first programmed key will be associated with the first channel (relay 1),
the second programmed key will be associated with the same remote control
to the second channel (relay 2). Having to program multiple remote controls
on both channels (relay 1, relay 2), complete the programming of each radio
control (as described above), and only then proceed with the other remote
controls. In case of using a single channel (relay 1) store the remote control
button to be assigned.
OFF
The channels will be associated automatically: the first key stored will be
associated with the first channel (relay 1), the second key to the second
channel (relay 2). E 'enough to program the first key, the second will be
recognized automatically.
DIP 2 ROLLING CODE / CODE FIXED
ON
Rolling code
OFF
Fixed code
DIP 3 ACTIVATION PROGRAMMING BY REMOTE CONTROLS (ECO-R)
ON
Enable
OFF
Disable
DIP 4 FUNCTION "TOGGLE" EA "PULSE" (relay 1)
ON
The first channel, received the impulse of the TX will keep switching.
OFF
The management of the first channel is at pulse
