VDS ELECTRIC LOCK WITH BUTTON
COD. 167/E
FUNCTION:
The electric lock can be operated by electrical impulse or by push button
if enabled with the key.
It ensures high security and protection for doors and gates.
It is equipped with button that can be activated by turning the key.
Suitable for intercom systems or access control, for residential and
industrial use.
This product can be installed on swing doors or hinges that do not
exceed 300kg.
INSTALLATION:
Use the provided screws to install the lock and the stop.
We recommend an installation distance of minimum 5mm from the body
of the lock to the stop.
The load of the spring can be adjusted in relation to the weight of the
door and the closing speed by the internal hexagonal nut.
Use a 9-12Vdc voltage.
With unlocked electric lock if you push the button the lock will
automatically unlock within 1 second.
WARNING:
The electrical impulse must not be longer than 8 seconds.
To lubricate the mechanism we recommend to use graphite lubricant in
powder.
ELECTRICAL CONNECTION:
Use cables having cross sections calculated on the basis of the circuit
length and in any case, not smaller than 1 sq. mm.
The electric lock efficient operation is not guaranteed with voltage input
lower than 8V, measured directly at the lock terminal board, during the
electric impulse.
VDS CONSORZIO
VIA CIRCOLARE PIP N. 10
65010 S.TERESA DI SPOLTORE (PE) – ITALY
T +39 085 4971946 F +39 0854973849 MAIL: [email protected]
