■
Adjusting the LCD monitor
If mounted on the supplied suppport, the monitor can be adjusted to your
viewing angle.
☞
Turn the monitor until the best angle of view is reached.
☞
Press the release button on the monitor support to tilt the monitor to its
best position.
■
Remote control
The VDO Dayton Navigation System is controlled by an infrared remote
control.
☞
Press the release keys at both sides of the holder to remove the remote
control.
a
Before driving off, slide the remote control back into the holder until it
clicks into position.
The keys on the remote control have the following functions:
ALT-R
Plan an alternative route.
REP
Repeat current acoustical guidance advice.
8
Cursor key upwards; select options.
4
Cursor key left; select options.
6
Cursor key right; select options.
2
Cursor key downwards; select options.
OK
OK key; confirm a selection.
-
Decrease voice volume of guidance advice.
+
Increase voice volume of guidance advice.
MENU
Show Main Menu.
If you use your remote control in its holder, the internal batteries are not used.
When the batteries are exhausted the navigation system may no longer react
on key presses.
☞
Slide the remote control into its holder to resume normal operation.
☞
Replace the batteries.
▲
Keyboard illumination
The keyboard of the remote control is illuminated when you press one of the
keys. The illumination is switched off automatically after a while. When
inserted in the holder the keyboard is illuminated permanently as long as the
ignition is switched on.
CONTROLS
English
11
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
D:\LOB-AM\22sy330.00\3112_316_0856_1_layout2.vp
Donnerstag, 9. September 1999 10:44:18
Farbprofil: Deaktiviert
Komposit Standardbildschirm