VDO MD 4000, Руководство пользователя

Страница: 4 / 10

4
Refer to the separate installation card.
Before installation and mounting please ensure that all parts needed are present, and that you
have the correct tools needed to complete the task.
As the MD4000 DAB Receiver has initially to be connected to the MR4000 Radio, it is strongly
recommended that the negative car battery terminal be disconnected until the receiver has been
mounted and fully installed.
B L U E C O N N E C T O R C 3 for the MD4000 DAB receiver
You can connect the MD4000 DAB Receiver to the MR4000 Radio by utilising the C3 Blue
Connector and cabling supplied. Please ensure that all cabling is long enough (dependant on
placement of the MD4000) and that the cable is not trapped or forced too tightly around
obstructions which may cause damage to the cable.
Reconnect the set only after fully installing the MD4000 DAB Receiver.
■
M O U N T I N G
Where you decide to mount the MD4000 DAB Receiver is dependant on the space available
within your vehicle.
When installing the MD4000 DAB Receiver always take care not to place it where it obstructs the
driver or passengers or where, in the event of an accident it may cause injury to the driver or pas-
sengers of the vehicle.
INSTALLATION