VDO DTCO 1381, Инструкция по эксплуатации для компании и водителя, Страница: 68 / 116

68
DTCO 1381
Overview of the events
7. Messages
7
쮿
Overview of the events
If an event repeats on a continuous basis, please contact an authorised
workshop.
Picto / reason Meaning Measure
!  security
breach
The following are possible causes:
앫
Error in the data memory, data security in the DTCO 1381 is
no longer ensured.
앫
The data from the sensor are no longer reliable.
앫
The DTCO 1381 housing was opened without authorisation.
Acknowledge message.
!  1 security
breach
앫
The card lock is disturbed or defective.
앫
The DTCO 1381 no longer detects a tachograph card that
was previously inserted correctly.
앫
The identity or authenticity of the tachograph card is not
proper or the data recorded on the tachograph card is not
reliable.
Acknowledge message.
If the DTCO 1381 recognises security
breaches which do no longer ensure the cor-
rectness of the data on the tachograph card,
the tachograph card is automatically ejected
(even while the vehicle is moving)!
Insert tachograph card once again or have it
checked if necessary.
!  power
interruption
The power was disconnected or the power supplied to the
DTCO 1381 / sensor was too low or too high. Under certain con-
ditions this message can also appear when the engine starts!
Acknowledge message.
 Refer to “Power interruption” on page 20.
!  sensor fault
The communication with the sensor is interrupted. Acknowledge message.
!  motion
conflict
Contradiction in the evaluation of the vehicle movement
between sensor and an independent signal source. Perhaps the
function (ferry/train) was not set during the transport.
Acknowledge message.
Contact an authorised workshop as soon as
possible.

Service
only