![background image](http://html.mh-extra.com/html/vdo/ctc-ii/ctc-ii_operating-instructions-manual_858229021.webp)
II
• E
01
/2
00
9
21
General description
CTC II power supply
2.6.1
Roller Interface Module
The Roller Interface Module is connected.
◄
Condition
Always adhere to the safety guidelines on
Page
.
◄
Important
Switching on the
Roller Interface
Module
1
Turn the key of the Roller Interface Module clockwise
(to Position "I").
The LED on the Roller Interface flashes green. The Roller
Interface Module now attempts to establish a Bluetooth
connection with the CTC II.
If the LED turns green, the Roller Interface Module is
connected to the CTC II via Bluetooth.
The symbol in the CTC II's display indicates that a
connection between the CTC II and the Roller Interface
Module exists.
This symbol also gives you information about the field
strength of the Bluetooth connection. The more steps that are
shown (max. five), the better the field strength.
◄
Important
Switching off
2
Turn the key of the Roller Interface Module anticlockwise (to
Position "O").
The Roller Interface Module is now switched off.