Installing the Roller Interface Module
Connection J13 – Trailing cable interface (optional)
18
• Edition 01/2
009
4
3
Break the press cut (4) (for feeding through the interface for the trailing cable)
out of the housing (e. g. using a screwdriver).
4
Push the trailing cable interface through the opening from the inside.
5
Secure the trailing cable interface using the union nut.
6
Plug the connection cable plug into the J13 8-pin plug connector (see Pos. (14),
Fig. 1 on Page 7).
The trailing cable connection has now been installed in the Roller Interface
Module. The trailing cable to the CTC II can now be connected.
When laying the cables, make sure that no one can stumble over them and
that no damage to the cables can be caused by other objects or by the effects
of heat.
◄
Caution