14
* Depending on version
SAM (Software Access Mode)
It is possible to modify many of the set's default settings according to your preferences via 'SAM'.
• Press
to enter the 'SAM' menu.
• Press or to select one of the options in the menu you want to modify.
• Press
or
to select the value/setting.
• Press
to exit the 'SAM' menu.
The set automatically leaves this mode after 30 seconds if no key presses are made.
Option
Value/Setting
Usage
( or )
(
or
)
TAVOL [1 to 31] Select volume level of Traffic Announcement, News bulletins
and Alarm messages.
START
[1 to 31]
– Select the start-up volume when power on.
– After modification of the start-up volume, if the set is
switched off and on within 10 minutes, the start-up volume
reverts to the last used volume setting.
– After modification of the start-up volume, if the set is
switched off and on after more than 10 minutes later, the
start-up volume is the level defined in 'SAM'.
MUTE
[0 to 5]
Select the mute level.
NAV*
[OFF, LOW, HIGH]
– Select 'OFF' if no navigation computer is connected to the
set.
– Select 'LOW' or 'HIGH' according to the navigation
computer's mute signal.
BEEP
[0FF, 1, 2, 3, 4, 5]
Select volume level of confirmation beeps.
SDVC *
[OFF, 1, 2, 3, 4]
Select the SDVC (Speed Dependent Volume Control)
compensation volume level (only when connected and
calibrated, see 'SDVC' in 'INSTALLATION' (page 5) and
'SPECIAL FUNCTIONS' (page 13)).
Level 1 gives a smaller increase while level 4 gives gives a
greater increase with respect to the car's speed.
TEL/
[TEL OFF, MUTE HI,
– Select 'TEL OFF' if no car phone is connected to
HFREE
MUTE LO, HFREE LO
the set.
HFREE HI]
– Select 'MUTE LO' or 'MUTE HI' (according to phone type)
to automatically interrupt the set's sound output when
using your car phone.
– Select 'HFREE LO' or 'HFREE HI' (according to phone
type) if your phone provides a loudspeaker connection.
CLK
[ON, OFF]
Select 'ON' to activate CLOCK feature.
CLOCK
[RDSCLOCK,
Select 'RDSCLOCK' to activate RDS clock or "MANCLOCK'
MANCLOCK]
to set clock manually.
[CLOCKSET]
If 'MANCLOCK' selected; set the time.
to adjust the hour
digit,
to adjust the minute digit.
[12HCLOCK,
Select desired clock format.
24HCLOCK]
004-16 Mid_Eng
8/15/02, 6:48 PM
14
