VDO CD 1604 MP3 -, Руководство пользователя

Страница: 8 / 14

9
RADIO OPERATION
BAND SELECTION
At tuner mode, press softkey button F1 (7)
shortly to select the desired band.
The reception band will change in the
following order:
STATION SELECTION
Press
►►
button (10) or
◄◄
button (11)
shortly to activate automatic seek function.
Press for 2 seconds until “MANUAL”
appeared on the display, the manual tuning
mode is selected. If both buttons have not
pressed for several seconds, they will retune
to seek tuning mode and get back automatic
seek function.
AUTOSTORE
- Automatic Memory Storing
Press FUNC button (23), activate AST
Function by softkey button F3, the radio
searches for 6 strongest stations and
stores them into the presets of the
currently selected band.
Note:
Any stations that were previously
stored in this memory bank are replaced
by the new stations.
Press Softkey button F2 (8) shortly to
scan all frequency throughout the
entire band.
STATION STORE AND RECALL
Press any one of the preset buttons
(1 to 6) to recall a station which had been
stored in the memory. Press a preset
button for 2 seconds, previous preset
station can be overwritten by current
tuned frequency.
RDS (RADIO DATA SYSTEM) OPERATION
The RDS data are the PI, PS, TP, PTY, TA
and AF data.
PI: Program Identification Code
Code for identifying program
PS: Program Service Name
Broadcast station name data expressed
in alphanumerically character
TP: Traffic Program Identification
Identification data for traffic
information broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or not
AF: Alternative Frequencies
Frequency list of broadcasting station
transmitting the same program
Setting AF Mode
- Press Softkey button F2 (8) briefly to
Switch on/off
AF
mode.
- Whenever
AF
is switched on, symbol “
AF
”
appears on the display.
- The tuner will return to
A
lternative
F
requencies whenever the reception
signals getting worse.
- “
ALARM
” will be displayed when an
emergency broadcasting is received;
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control is
set at minimum.
Using PTY to Select Program
The PTY function allows you to search for
stations with a particular Program Type.
To select your program type, press the
Softkey button F1 (7):
Now you can select the music type or
speech type using preset keys 1 - 6 for your
selection as listed in below table:
FM1 FM2 FM3 MW LW
PTY music group PTY speech group PTY off
English