Tips for convenient operation
■
Cross-border guidance
Owing to the high data volume, the European navigation data is stored on several CD
ROMs (map CDs). In order to nevertheless achieve cross-border guidance, the most im-
portant European cities and roads (Major Roads Europe) are additionally stored on the
map CDs at present. In order to enable cross-border navigation, the C-IQ products
must be activated for the destination and transit countries. Alternatively, route plan-
ning can be performed without activation of this feature if the route is covered by the
connecting road network (Major Roads Europe). In this case, no visual and audible gui-
dance is available after crossing the border into a deactivated country.
✎
For continuous cross-border guidance, it is imperative that the relevant C-IQ pro-
ducts are activated.
The following alternative input methods requiring the map data from two or more
map CDs are available for activating route planning:
Alternative 1:
Insert the map CD for the destination country. Start route planning and follow the di-
rectional arrow displayed to the next digitised road. As soon as you have reached the
connecting road network, the directional arrow disappears and visual and audible gui-
dance begins.
Alternative 2:
Insert the map CD for your current location. Start route planning. Owing to the data
volume, you can only enter a destination which is covered by the connecting road net-
work. When approaching the destination, insert the map CD for the destination coun-
try. Then enter details of the destination and start route planning again.
✎
Please note that the connecting road network is used exclusively for route planning
when the navigation CD of the current location is not inserted.
Alternative 3:
Plan your travel route to a desired border crossing using the navigation CD ROM for
your current location. After crossing the border, insert the map CD of your current lo-
cation and start route planning to your destination or to the next border crossing.
Appendix
61
