Product Manual CANcockpit
TU00-0726-5111102
Technische Änderungen vorbehalten
0609
Technical details subject to change
5.2 - 23
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
CANopen-Specification for CANcockpit
Standardised Device Profile Area
Read 64 digital Inputs byte wise (6000h)
This object shall read groups of 8 input lines as 8-bit information. Up to eight 8-Bit inputs are addressable in CANcockpit.
The CANcockpit main gauge has no hardware digital inputs. However it is possible to select internal variables via
configuration, for example the status of the 16 SAT- and 16 external warning lamps, plus the switch outputs as digital input
signals to be transmitted to the CANopen bus. The selected byte variables are polarity processed (object 6002h) before they
are made available in an internal result array "Copen_b6000DI1[8]".
OBJECT DESCRIPTION
Index 6000h
Name
Read Input 8 Bit
Object Code
Array
Data Type
UNSIGNED8
Category
Conditional: Device with digital inputs
ENTRY DESCRIPTION
Sub-Index 0
Description
Number of Inputs 8-Bit
Access Ro
Entry Category
Mandatory
PDO Mapping
No
Value 8
Default Value
8
Sub-Index 1
Description
Read Input 1 to 8
Access Ro
Entry Category
Mandatory
PDO Mapping
Default
Value Range
Unsigned8
Default Value
No
Sub-Index 2
Description
Read Input 9 to 16
Access Ro
Entry Category
Mandatory
PDO Mapping
Default
Value Range
Unsigned8
Default Value
No
Sub-Index 3
Description
Read Input 17 to 24
Access Ro
Entry Category
Mandatory
PDO Mapping
Default
Value Range
Unsigned8
Default Value
No
Sub-Index 4
Description
Read Input 25 to 32
Access Ro
Entry Category
Mandatory
PDO Mapping
Default
Value Range
Unsigned8
Default Value
No
Содержание CANcockpit Series
