VDO CYTEC C 15, Инструкция по установке и эксплуатации

Страница: 14 / 22

WS in mm / inch
1x
GB
C
15
12
15. Entering your wheelsize
You may enter two different wheelsizes into your VDO CYTEC C 15, i.e. one wheelsize for your street bike and another one
for your mountain bike.
Your VDO CYTEC identifies different wheelsizes as WS 1 = wheelsize 1 and WS 2 = wheelsize 2.
following defaults are entered
wheelsize 1 = WS1 = 2155 mm
wheelsize 2 = WS2 = 2000 mm
Watch out: Above defaults are automatically applied after a battery change.
After a battery change, the correct wheelsizes for your bikes have to be re-entered
How is the wheelsize precisely determined?
Place the front wheel of your bike with the valve at the bottom, mark this position with a line and push your bike ahead until
exactly one rotation of the front wheel is completed. Draw another line where the valve now is. Take a ruler and measure the
distance between marks 1 and 2 which reflects the wheelsize = wheel-circumference. The figure measured (inches or mm)
is the wheelsize to be entered into your computer.