MODE 1 5sec.
to quit
MODE 1 0,1sec.
switch to next
MODE 2 0,1sec.
to increase
MODE 1 5sec.
GB
C
10
WL
15
16. Programming (setting-up) your odometer ODO
You can enter individual odometer values into your CYTEC C 10 WL at any time, i.e. transferring data from your old computer
into your new VDO CYTEC C 10 WL or after a battery change.
Watch out:
after a battery change, your data for total ODO is reset to zero.
TIP: If you want to re-enter your totals after a
battery change, take down the value for ODO
before removing the battery.
Step 1: Call information for ODO into your
display.
Step 2: Start the set-up mode for odometer
by pressing the MODE 1 button for 5 sec.
The last number is flashing.
Entering data is done by MODE 1 and MODE 2 buttons. (see set-up mode)
