Press to Stop
switch to next
Press 5sec.
to start
Press to Stop
and quit
Press to Stop
switch to next
Press 5sec.
to start
Press to Stop
and quit
Press to Stop
switch to next
Press 5sec.
to start
Press to Stop
and quit
15
GB
5.4 Setting the clock CLK
Your VDO CYTEC C 05 features a clock with hour and minute display
in 24 h mode To access the clock set-up mode proceed as follows:
Step 1: call in the CLK information into your display
Step 2: Press the MODE button for 5 sec.
The set-up mode for the clock starts.
You will see the digit flashing and changing
its value (14...15...16).
Step 3: Once the correcthour figure is
flashing (i.e. 15), press the MODE
button, then the minute figure is flashing
and changing its value.
Step 4: Once the correct minute value is
flashing, press the MODE button, the computer
will then return to regular display mode.
Watch out!
The time (CLK) has to be reentered after a battery change