UK-4
1. To activate full scan, press the PLAY/PAUSE/SCAN button on the unit (or remote control) once to enter into the
“Full scan” mode, press the SELECT/FM MONO/ST. button on the remote control to confirm, the display
will show “Searching...” and a slower progressing slide bar.
2. All the stations that have been found will be stored automatically, to explore the stations that have been found,
the SKIP/TUNE SEARCH ( UP or DOWN) button for selection.
DAB/DAB+ manual tune
1. To select manual tune, press the SELECT/FM MONO/ST. button on the unit (or remote control) to enter into the
“Manual tune” mode.
2. Press the SKIP/TUNE SEARCH (UP or DOWN) button to scroll through the DAB/DAB+ channels, the display will
show “5A to 13F” and their associated frequencies.
3. W
hen your desired frequency appears in the display, press the SELECT/FM MONO/ST. button to confirm. The
name of the station group (ensemble/multiplex) will be displayed.
4. T
the STOP/MENU/INFO t
o see what stations are present on the found ensemble/multiplex.
Secondary Services
On some occasions you will see a “>” symbol appeared after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries. The secondary services are inserted
directly after the primary station. To select the secondary station, press the SELECT/FM MONO/ST. button on the
remote control when the “>” appears in the display.
FM mode
1. To select FM, press the DAB/FM/AUX button on the unit (or remote control), the display will show FM and the
frequency.
2. To activate frequency auto search, press the PLAY/PAUSE/SCAN button on the unit (or remote control) until it
starts to scan down or up the frequency band; it will stop automatically once a station has been found.
3. You can also press the SKIP/TUNE SEARCH(UP or DOWN) button on the unit (or remote control) to select your
desired frequency.
4. Press the SELECT/FM MONO/ST. button on the unit (or remote control) to toggle select between the FM “STEREO”
and “MONO” reception.
STORING AND RECALLING STORED PRESET STATIONS
In either DAB or FM mode, you can store up to 30 stations to the favourite presets; this will enable you to get direct
access to your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the ID3/MEM/C-ADJ. button on the remote
control until the display will show “ Preset Empty # ” and the “#” flash.
2. Press the SKIP/TUNE SEARCH ( UP or DOWN) button on the remote control to select your desired station preset
number, then press the ID3/MEM/C-ADJ. button on the remote control to confirm your selection; the display will
show “Preset # stored” in DAB/FM mode.
3. To recall a preset station, press the ID3/MEM/C-ADJ. button once and then press the SKIP/TUNE SEARCH
(UP or DOWN) button to select the stations that you have stored, then press the ID3/MEM/C-ADJ. button on
the remote control to confirm your selection.
Note: 1. The stored stations will be saved into its memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location.
2
press
. During the unit in STANDBY mode, press and hold the STOP/MENU/INFO button to erase all preset
memory.
ouch
ouch plate t
In FM mode:
DISPLAY MODES
Every time you press the
STOP/MENU/INFO
button, the display will cycle through the following display modes:
Audio bit rate
Programme Type
Time/Date
Signal strength
Ensemble/Multiplex (Group name)
DLS (Scrolling text)
Frequency
In DAB/DAB+ mode:
Auto(Mono)
Frequency
The frequency of the present station will be displayed.
FM
FM
Signal strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar will
be from left to right.
Programme type
Time and date
This describes the style of the programme that is being
The time and date will be automatically updated by the
broadcast. If the information is not available, the display
broadcasted information; there is no need to set the
will show “<Programme Type>”.
clock manually. In the unlikely event that no clock
information is received, the display will show
“<Time/Date>”.
Audio bit rate
The display will show the digital audio bit rate being
received.
Stereo and
Mono.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations
that are bundled and transmitted together in a single
frequency. There are national and local multiplexes,
local ones contain stations that are specific to that area.
DLS
DLS stands for Dynamic Label Segment which is a
scrolling message that the broadcaster may include in
their transmissions. The message usually includes
information such as programme details …etc.
Frequency
Signal strength
Auto(Mono/Stereo)
Содержание DCD6.0
Страница 3: ...1 2 3 4 5 10cm 6 7 8 9 10 11 2 2 2 2...
