VDG TM100B25, Руководство по установке

Страница: 4 / 18

3
306 (03/2013)
Drum Motor with Sprockets (STM)
Assembly Procedure
1 . Align pin slot in Sprocket (3) to the welded pins (2) on the shell (1) .
2 . Slide sprocket (3) over the Drum Motor shell (1) .
3 . Insert Set Screws (4) in their respective positions .
Do not overtighten.
4 . Repeat the sequence for the balance of the Sprockets .
5 . Space Sprockets on the face of the shell to match belt pockets .
6 . Lock center Sprocket/s by lightly tightening set screws .
IMPORTANT NOTE:

Overtightening of the set screws can result in the deformation
of the sprocket.

Ensure that locked Sprockets in head and tail pulleys are
corresponding to the same pockets in the belt.
4
3
2 1
Pin Slot
Parts Required
Item Number
Description
Drum Motor Shell
Welded Pins
Sprocket
Set Screws 1
2
3
4