Rev. C-072415
Page 4
P/N VDC1500-10MNL
BatteryMINDer
®
&
Plus with SmarTECHnology
®
Model 1500 Series
6. Do not operate charger with damaged cord or plug – replace the cord
or plug immediately.
7. Do not operate charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; call
VDC Electronics Tech
Support Dept. 800.379.5579 x6 (ET)
for advice.
8. Do not disassemble charger; call
VDC Electronics Tech Support
Dept. 800.379.5579 x6 (ET)
for advice when service or repair is
required. Incorrect reassembly may result in a risk of electric shock
or fire.
9. To reduce risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning.
10. WARNING – RISK OF EXPLOSIVE GASES
a) WORKING IN VICINITY OF A LEAD-ACID BATTERY IS
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF
UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS
EACH TIME YOU USE THE CHARGER.
b) To reduce risk of battery explosion, follow these instructions and
those published by manufacturer of any equipment you intend to use
in vicinity of battery. Review cautionary marking on these products
and on engine.
11. PERSONAL PRECAUTIONS
a) Consider having someone close enough by to come to your aid
when you work near a lead-acid battery.
b) Have plenty of fresh water and soap nearby in case battery acid
contacts skin, clothing, or eyes.
c) Wear complete eye protection and clothing protection. Avoid
touching eyes while working near battery.
d) If battery acid contacts skin or clothing, wash immediately with soap
and water. If acid enters eye, immediately flood eye with running cold
water for at least 10 minutes and get medical attention immediately.
e) NEVER smoke or allow a spark or flame in vicinity of battery or
engine.
f) Be extra cautious to reduce risk of dropping a metal tool onto battery.