VD TECH MPC0101VD-001, Руководство пользователя

Страница: 12 / 36

9
NETBOOK
Battery Maintenance
The NETBOOK’s battery pack, like all rechargeable batteries, has a limit on the
number times it can be recharged. The battery pack’s useful life will depend on your
environment temperature, humidity, and how your NETBOOK is used. It is ideal that the
battery be used in a temperature range between 5
?
and 40
?
. You must also take into
account that the NETBOOK internal temperature is higher than the outside temperature.
Any temperatures above or below this range will shorten the life of the battery. But in any
case, the battery pack’s usage time will eventually decrease and a new battery pack must
be purchased from an authorized dealer for this NETBOOK. Because batteries also have a
shelf life, it is not recommended to buy extras for storing.
For safety reasons, DO NOT throw the battery in fire, DO NOT short circuit the contacts, and
DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack
caused by impact, turn off the NETBOOK and contact an authorized service center.
3.3 Touchpad usage
Clicking/Tapping -With the cursor over an item, press the left button or use your fingertip
to touch the touchpad lightly, keeping your finger on the touchpad until the item is
selected. The selected item will change color. The following 2 illustrations produce the
same results.
Double-clicking/ Double-tapping -This is a common skill for launching a program
directly from the corresponding icon you select. Move the cursor over the icon you wish
to execute, press the left button or tap the pan twice in rapid succession, and the system
launches the corresponding program. If the interval between the clicks or taps is too long,
the operation will not be executed. The following 2 illustrations produce the same results.
Dragging -Dragging means to pick up an item and place it anywhere on the screen you
wish. You can move the cursor over the item you select, and while keeping the left button
depressed, moving the cursor to the desired location, then release the button. Or, you can