VCS VIP 10, Руководство пользователя

Страница: 84 / 122

Configuring the Receiver Chapter 7
84 VIP 10
The current firmware can be obtained from VCS Customer Service or
downloaded from the Internet at our Web site (www.vcs.com).
Warning!
Before starting the firmware upload, be sure that you have selected the
correct file! Uploading the wrong files can result in the unit no longer being
addressable, requiring it to be replaced.
Do not interrupt the firmware installation for any reason! Interruption will
damage the flash EPROMs. This can also result in the unit no longer being
addressable, requiring it to be replaced.
– First, save the update file to the hard disk.
– Enter the full path for the update file in the field or click Durchsuchen... to
locate and select the file.
– Click Upload to begin transmission to the unit. Transmission progress can be
monitored from the progress bar.
After the upload is completed, the new firmware will be decompressed and used
to reprogram the flash EPROM. The time necessary is indicated by the message
going to reset Reconnecting in ... seconds .
After the upload is completed successfully, the unit will restart automatically.
If the „operating status“ LED is red, the upload has failed and must be done again.
This requires that you work from a special page:
– Enter the IP address of the unit in the browser and append
/main.htm
(for
example
192.168.0.12/main.htm
).
– Repeat the upload.
Configuration download:
The VIP configuration data can be saved on a computer and the saved data
loaded on a unit from the computer.
– Click Download . A dialog will appear.
– Follow the instructions to save the current settings.