www.videocamerasecurity.com
VCS-PTZCR detailed operating instruction
©2010
www.VCSDVR.com
4/4
b. press PRESET, SETUP button for 3 seconds each.
Страница 1: ...www videocamerasecurity com VCS PTZCR detailed operating instruction 2010 www VCSDVR com 1 4 VCS PTZCR detailed operating instructions ...
Страница 2: ...ked 9 below preset point do not need to press ENTER button to confirm the camera will reach preset point position If want to enter 9 or more preset point please press key To delete the wrong please press C key and press ENTER key the camera will arrive at the preset point location 2 Remove existing preset points Press DELETE button for 3 seconds to enter delete mode preset points respectively ente...
Страница 3: ... the up down key to select P protocol or D protocol use the left right key to change the baud rate there are 1200 bps 2400 bps 4800 bps 9600 bps optional and then press ENTER button Note Pelco D protocol is only supported at this time 4 Multi cameras Selection Control The first step set your camera IDs with the dip switch settings on your PTZ refer to your PTZ manual The second step select the cam...
Страница 4: ...www videocamerasecurity com VCS PTZCR detailed operating instruction 2010 www VCSDVR com 4 4 b press PRESET SETUP button for 3 seconds each ...
