Configuring
The Detector features and options include:
- digital output change rate limiting filter
- digital integrating (averaging) filter
- temperature measurement channel with internal sensor
- free assignment of each analog output to chosen parameter
- flexible setting of analog output scales for each output
- output shift and slope adjustment for calibration
- Modbus controlled forced state option for analog outputs .
The detector can be configured through its RS485 interface by Modbus RTU commands.
A standard configuration kit includes Model E1087 USB-EIA485 converter and a software pack.
Please contact your Seller for more information.
Return to default settings
To reset the device’s Slave ID, baudrate and sbit number to factory settings, proceed as follows:
1. De-energize the device
2. Connect the J3 jumper
3. Turn on the device
4. De-energize the device
5. Disconnect the J3 jumper
6. Turn on the device
RS485 communication interface
See next pages
Ventilation Control Products Sweden AB
-
Phone: +46-31-811666
-
E-mail: [email protected]
-
Web: www.vcp.se
Carbon Monoxide (CO) Gas Detectors
RCO-series
April 2020
