VCON HD100 Getting Started Guide
3
LIABILITIES
VCON’s entire liability and the Purchaser’s exclusive remedy shall
be at VCON’s option, either return of the price paid or repair/replacement of the
Product not meeting VCON’s declared Limited warranty. VCON or its suppliers
shall not be liable in any event to anyone for any indirect, incidental, consequential,
special or exemplary damages including without limitation damages for loss of
business profits, business interruptions, business information or other pecuniary
loss arising out of the use of or inability to use the said Product even if advised of
the possibility of such damages. In any case, VCON’s entire liability under any
provision of this agreement shall be limited to the amount actually paid by the
Purchase for the Product.
Modifications
The FCC requires the user to be notified that any changes or modifications made to
this system that are not expressly approved by VCON Ltd. may void the user’s
authority to operate the equipment.
Safety Notice
When you use the HD100 system, observe the following safety guidelines:
1. Make sure that the voltage of the power supply matches the AC power
available at your location:
— 115V/60Hz in most of North and South America and some Far
Eastern countries such as Japan, South Korea and Taiwan.
— 230V/50Hz in most of Europe, the Middle East and the Far East.
2. Make sure the monitor and attached accessories are electrically rated to
operate with the AC power available in your location.
3. Plug the accessories’ power cables into properly grounded power sources.
These cables are equipped with three-prong plugs to help ensure proper
grounding.
4. Do not use adapter plugs or remove the grounding prong from a cable. If
you must use an extension cable, use a three-wire cable with properly
grounded plugs.
5. Make sure that nothing rests on the cables and that the cables are not
located where they can be stepped on or tripped over.
6. Do not spill food or liquids on the system or accessories.
7. Keep the system away from radiators and heat sources, and do not block
cooling vents.
