Vcheck V2400, Руководство пользователя

Страница: 10 / 31

18 19
Included of the BIONOTE V2400 Analyzer
Included
Calibration Set
CA
L-1
CA
L-2
CA
L-3
AC Power cable
Optional
Test Device
Barcode scanner
Printer paper
(57mm width Thermal paper is used)
If the paper is small, "no paper" may be
displayed due to sensor malfunction.
Chapter 3. Log On and Setting
Operation of Analyzer
Step 1. Connecting the power cable
1-1. Place the Analyzer in a proper environment where it can be plugged
into outlet and barcode scanner (optional) can be positioned together.
1-2. Connect the power cable to the power connector on the back of the
Analyzer and to the outlet.
1-3. Once the connection is complete, the analyzer is ready for use.
Step 2. Analyzer Log On
2-1. Press log on button.
2-2. The initial log on ID is admin and the password is 1111.
Step 3. Analyzer Setting
:KHQWKH$QDO\]HULVVHWXSIRUWKHࢉUVWWLPHXVHULQIRUPDWLRQPXVW
be registered.
3-2. For initial setup, select the Utility screen on the main screen. The
details of the setting (Utility) menu are shown below.
Step Menu Submenu
1 System
Date/Time
Print
Language
Update
Brightness/Volume
2 Operator Add, Edit, Delete
3 Network Network, HIS / LIS
Step 1: Log On Mode
1. Enter the Operator ID and password on the Log On screen and press the Log On
button. Operator ID is “admin” and password is “1111”.