5
V
CALL MONITORED WIRELESS VEHICLE INTRUSION SYSTEM
Model VC 1000
INSTRUCTIONS
V
CALL DISABLER
The DISABLER is an anti-theft system designed to prevent the vehicle from being stolen. It
incorporates a built-in starter and auxiliary disabler to disable a fuel pump or similar device. The
DISABLER will transmit alarm signals or vehicle starting information to the KEYPAD. The
DISABLER incorporates the
DISABLER UNIT
VC 200 and two
TRANSMITTERS
, VC 300.
DISABLER UNIT MODEL VM 200
OPERATION
The
DISABLER UNIT
Model VC 200 detects (door, hoods, glass break, etc.) the vehicle intrusion
disables the vehicle (starter fuel pump, etc) initiates in vehicle responses (piezo, flashing dash
mounted LED, parking lights, etc.), and provides the signal for the
TRANSMITTER
, Model VC
300.
1
The dash mounted LED will flash slowly to indicate that the system is armed. If the
door or auxiliary inputs are activated an alarm condition will occur. In alarm the
LED will become illuminated, the piezo will sound, the horn output will be activated,
and parking light outputs will be activated. The DISABLER will transmit a digital
RF signal to the KEYPAD.
2
If the door opens while the system is armed, the piezo will sound to indicate that the
system will go into alarm after the programmed delay.
3
The alarm conditions will reset if the instant disarm input is activated. The system
can also be deactivated by turning the ignition on and disarming the system.
4
If the system is not disarmed, the parking light output will flash for 30 minutes and
the horn output will sound for 128 seconds. The dash mounted LED will flash twice
quickly followed by a pause to indicate that there has been an alarm. Alarm memory
will reset when the ignition is turned on.
5
The disabler will flash the dash mounted LED quickly to indicate that the arming
countdown is in progress. The countdown can be stopped by inserting in the ignition
key. The countdown is 30 seconds long.
6
When activated, the alarm input will instantly arm the
DISABL
ER
.
7
If the
DISABLER
arms with an open or broken device, the disabler module will flash
the parking light output 6 times. The device will be by passed until it is closed or
fixed.
8
The “car running” negative (-) input can be connected to the negative (-) output of the
vehicle’s remote starter. The DISABLER will send a digital RF signal to the
KEYPAD each time the car is started by remote.
9
Power is drawn from the vehicles 12v DC electrical system.
Содержание VC 1000
Страница 7: ...7...