Connection diagram for cubic cameras
C
C
GERMANY
R
C
Mounting of the cubic camera
The wall mount is included in the scope of delivery. The Cubic camera mount allows for directing the camera in any position desired.
Connection diagram for plug-in cubic camera connection cable
The Cubic camera is to be operated with the connection cable included in the scope of delivery. The connection cable is fitted with a BNC socket
and a 12 VDC mini sub socket.
Thus the simple plug-in connection to the power supply ( Art.No. 20114) is possible as well as to the existing video cable
with BNC.
1. 1,5 mm screw to be losened with the screw
driver or hexagon key - see photo.
2. Lens to be slowly turned left and right until
the picture to be seen clearly on the monitor.
It is recommended to use our color lcd service
monitor (art.no. 20191) which is powered by
rechargeable batteries.
3. After having exchanged and focussed the
lens, then lens fixation screw to be tightened.
Focal Adjustment respectively lens exchange
Trouble shooting
Reason
No camera picture
-Monitor is switched off
-Lines camera is not removed
-power supply is not connected or not existing
-Video connection is wrongly connected or interrupted
Picture appears milky
-Lens respec. CCD chip is dirty or steamed up
-75 Ohm monitor switch not switched on
Camera picture fading away
-Not enough illumination
Camera picture not sharp
-Lens focal adjustment to corrected
Camera picture displays moire
-Bad video earth connection
-Ground loops cause of different earth potential
If cannot solve the problem with aformentioned advices, then kindly revert with an
exact failure description
to our 24 hours fax service: 0 43 21-28 04 82
Technical data
Particular notes
Control respectively operator´s element
1/4" color CCD camera
Automatic Backlight Function (BLC)
480 TV lines
Recommended basic illumination 15 Lux
Power consumption 12V / 0,1A
Art.no. 13804-Z
none
Please read all read this instrcution carefully before connecting in order to avoid possibile damage
to the product and to make use of all product advantages.
Safety precautions
Make sure that the applied camera power supply and voltage is stable and the required
voltage of 12 VDC
is not exceeded or below minus/plus 10%.
Take care that positive /negative polarity is not connected in the wrong way.
If cannot account for the basic requiremnets , kindly use the suitable stabilized power supply ( Art.No. 20114), for power oversupply
destroys the camera and lower voltage leads to blameworthy camera performance. The cubic cameras are only designed for indoor use.
With the optional housings also outdoor applications possible.
Location:
Install the camera in such a way that no sun light ( window) or artifical light can penetrate into the lens.
Scope of delivery
The cubic camera (2) will be supplied completely with lens (1) and plug-in connection cable (3) to be fully operational. The connection cable is being
fitted with a plug on the camera end,which fits into the cubic camera socket. Pls. press the plug into this socket.
Prior to operation the lens cover must be removed.
Errors and modifications in technics, design and fitting excepted
CD_13804-Z / 06.09.05
2
3
1
1,2m connection cable
1,2 m
12V DC
Video
Monitor
Power supply
Camera