VBrick AmiNET130, Быстрый старт, Страница: 14 / 34

8 © 2010 VBrick Systems, Inc.
<ProgramName> Multicast H.264 </ProgramName>
<Message> Multicast H.264 Demo Stream </Message>
<Channel> 1 </Channel>
<IP> 239.22.2.151 </IP>
<Port> 4444 </Port>
</Stream>
</STBLocalUI>
Figure 5. Direct Connection – Full Screen Mode
Configuring a Local Channel Guide
To configure the set top box with a channel guide you will need to modify an xml file that has
the channel URLs. The
channels.xml
file contains the local mode program information
shown on the VBrick splash page (see Figure 3). This file will need to be modified (and
FTPed) so that the IP addresses, port numbers, and program data correspond to the actual
streams that are available at your site. As explained below, several steps are required to
modify and FTP this file.
T
To configure a channel guide:
1. Configure your local PC for FTP.
2. Telnet to the Amino STB and from there "ftpput" the
channels.xm
l file on your local PC.
3. On your local PC make any program changes to the file using a text or xml editor.
4. When done go back to the Amino STB and "ftpget" the file from your PC.
5. Reboot the Amino STB to display the new channel guide.
Configure Your PC for FTP
In order to modify "put" and "get" files, your Windows PC must be configured for FTP.
Note Do not add, delete, or rename any of the files (including
channels.xml
) on this set top
box. Any of these actions can make the set top box inoperable.