VBrick 7000 Series, Руководство по началу работы

Страница: 25 / 78

VBrick H.264 Appliance Getting Started Guide 15
Chapter 3
Shelf Setup
Topics in this chapter
VBrick Rack Mount Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
VBrick Rack Mount Shelf
The VBrick H.264 Rack Mount Shelf is a customized enclosure that accepts VBrick blades
only. It provides a common redundant power source and common cooling and supports 11
VBrick H.264 blade encoders in a standard 19 in. rack. It has hot-swappable, redundant AC
input power supplies and LED and audible failure alarms. It also has a common, hot
swappable cooling unit and a replaceable air filter. The chassis for a rack mount shelf has a
removable cable management panel (not shown) and card rails that make it easy to insert or
remove individual blade encoders.
Figure 5. VBrick H.264 Rack Mount Shelf
H.264 Blades
In general, the blades are fully-functional encoders housed within shelf rather than as
standalone appliances. Each blade is configured independently of the others and has its own
network connection and IP address. The blades can have Standard Definition connectors (see
Figure 6) or Standard and High Definition connectors (see Figure 7). In most respects, the