manualshive.com logo in svg

VBrick 7000 Series, Руководство по началу работы

Поделиться
Скачать
VBrick 7000 Series Скачать руководство пользователя страница 11

VBrick H.264 Appliance Getting Started Guide

1

Chapter 1

Introduction

Topics in this section

Appliance Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features and Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 2

Appliance Overview

Built on a completely redesigned architecture, the VBrick H.264 appliances represent 
VBrick’s newest networked video appliances. Capable of supporting both standard definition 
and high definition video delivery, VBrick expands its market leadership by continuing to 
deliver on its heritage of providing reliable, flexible, portable, scalable, and manageable 
networked video appliances. These ground breaking appliances allow organizations to deliver 
video in a wide range of quality—over any IP network infrastructure. The new H.264 
appliances promise vastly improved quality for a given bit rate, allowing organizations to 
deliver a better customer experience for any given bandwidth. 

Figure 1.  

VBrick H.264 Network Video Appliance 

Capabilities

VBrick’s H.264 appliances are the first in a line of products that will be delivered on VBrick’s 
new architecture. These appliances provide the following capabilities:

•

High Definition Video – For the first time, the new appliances support high definition 
video resolution allowing unsurpassed quality video at bandwidths of 1 Mb/sec and up 
(requires HD version).

•

Standard Definition Video – For lower bandwidth applications, video can still be 
delivered in standard definition with resolutions up to D1.

•

Encoding – Digitizing and compressing a video signal for delivery over an IP network in 
the H.264 video format. 

•

Multicasting – Multicast a live video directly from the appliance.

Содержание 7000 Series















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды