manualshive.com logo in svg

VBrick Systems VB4000 Series, Руководство администратора

Поделиться
Скачать
VBrick Systems VB4000 Series Скачать руководство пользователя страница 82

72

© 2008 VBrick Systems, Inc.

FTP Queue Operation

Changes to the entries on the screen do not take effect until you select an action button: 

Add 

to FTP Queue

, 

Remove from FTP Queue

 or 

Flush Queue

.

Hard Drive Status

For a description of hard drive status screens, see Status: Hard Drive on page 102.

Configuration: Passthrough

The TCP/IP network can serve as an intermediary between two VBricks and their serial 
ports or between a PC application sending IP packets and a VBrick's serial port. This feature 
supports a wide range of serial applications. Contact VBrick support for details and 
restrictions. RS-232 end-to-end control is initiated by enabling or disabling Passthrough. For 
more about passthrough, and how it can be used, see the 

VBrick Appliance Getting Started 

Guide

.

State

The current state of the hard drive. Values can be:

• Transfer in Progress.
• Idle.
• Invalid FTP Server.
• Invalid  User  Name.
• Invalid User Password.
• Local  File  Open  Error.
• Socket Open Failure.
• Transfer Failure.
• Socket  Quit  Failure.

Size

Size of the file to be sent.

Rate

Transmitted data rate of the file being FTPed.

Transfer

Current amount transferred.

Last Queue Operation File added OK, File removed OK, or blank.

Directory

Choose the directory on the hard drive that contains the file you want 
to send.

File

File name on the hard drive.

Destination

Server to which the file or files is to be transferred. Servers are 
configured in the Servers section of the same page. 

Add to FTP Queue Adds the selected file to the FTP queue. The FTP transfer starts 

immediately.

Remove from FTP 
Queue

Remove the selected file from the FTP queue.

Flush Queue

Removes all the current files from FTP queue.

Содержание VB4000 Series





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды