VBrick Systems EtherneTV v4.2.1 Portal Server, Руководство администратора

Страница: 106 / 180

94 © 2008 VBrick Systems, Inc.
permissions. For ease of implementation, VBrick recommends configuring User Groups and
Resource Groups (see these sections below), prior to configuring users.
However, if further individual permissions need to be assigned, administrators can add them
as a user. Under the users section, administrators have the ability to add, modify and delete
users. Submit may be pressed at anytime during the process or can be done when everything
has been added/modified. Users will have the permissions of the group as well as the
additional permission that are assigned to them. The ETV Portal Server is additive in its
permissions, meaning that it takes all of the permissions that are provided to a particular user
and provides all of these to the user.
Users can be added by using the VBrick Database if LDAP authentication is not available or
desired. Finally, in order to assign user PINs to access Set-Top Boxes, a user assignment is
needed (see Set-Top Box Authentication section below). Note that STB PIN access is
dependent on the VBrick Database being enabled. See Access Control on page 78 for details.
Submit Save changes and/or navigate to the next window.
Add New Takes the administrator to the Add New User, User Group, or Resource Group
screen (depending on which section you are in)
Clear All Clears any entries that have been entered in the individual sections.
Revert All Returns all entries to the last state entered in the database. This selection is
important if a mistake is made during entry.
Cancel Cancels out of the page. Changes are not saved.
Clear Clear eliminates or de-selects any entries in the particular section.
Revert Returns the selection to the last state entered in the database. This selection is
important if a mistake is made during entry.