Unfolding the Pedals
Note: For folding the bike: Please pull the toggle outwards and lower it to its folding position
PREPARING TO RIDE
Pull the toggle outwards and lower it into its unfold-
ing position
Do pre-ride Inspection (as mentioned in Pre-Ride Inspection Section) and before riding make sure
all components are properly secured otherwise serious harm or death could happen. This includes
all parts of ebike such as brake system, lights, tires, fenders, pedals, handlebars, handlebar clamp,
cranks, seat, and seatpost clamp.
Ensure you are not able to twist the seat or stem out of alignment by hand.
You need to check your saddle to be positioned at the proper height for you. Sit on the saddle while
you are facing forward, place the ball of your foot on the pedal at its lowest point. at this time your
leg should be almost straight with a slight bend at your knee. At this height, when the pedal is at its
lowest point you should be able to pedal the ebike without overextending your leg. If you need to
overextend your legs and your hips move side to side during pedaling, it means the seat must be
lowered.
For adjusting your seat post height unlatch the seat post clamp. Move the seat post to the favorite
height and close the seat post clamp (as you can see in the picture).
As suspension system on seat post increase 10cm (4”) to minimum height of ebike,
minimum recommended rider’s height for using suspension seat post is 160cm (5’ 4”).
Riders with height less than 160cm (5’ 4”) are recommended to use regular seat post.
Make sure to hear the pedal lock into
place once in the unfolded position
CAUTION
www.vbike.ca
vBike Canada
Be sure you have read and understood the vBike manual carefully and completely.
18
15
