VBC Racing Lightning 12, Инструкция по эксплуатации

Страница: 13 / 19

BAG MARKED
STEP9
Assemble TBX Shock
12
© VBC Racing LIGHTNING12
TBX Shock Body B-02-VBC-5023 x 1
TBX Shock Bottom Cap B-02-VBC-5025 x 1
TBX Piston [2 Holes] A-02-VBC-5027 x 1
TBX Shock Ball End B-02-VBC-5033
Shock Bottom O-ring Guard A-02-VBC-5030 x 1
M2x6mm O-ring C-02-VBC-5037 x 2
Lightning12 TBX Shock Shaft C-02-VBC-5026 x 1
M1.5x10 O-ring C-02-VBC-5035 x 1
M1.5 E-Clip C-02-VBC-5038 x 2
TBX Shock O-ring Guard A-02-VBC-5029
TBX Shock Thru Cap A-02-VBC-5031 x 1
M1.0x7.5 O-ring C-02-VBC-5036 x 2
5mm Pivot Ball A-03-VBC-1027 x 1
9
TBX Spring Adjuster B-02-VBC-5024 x 1
TBX Piston [3 Holes] A-02-VBC-5028 x 1
Note The Direction Of
O-ring Guard On Top
Fill supplied shock oil
and remove air by
moving the piston up
and down until air
bubbles disappear
TBX Shock Body
TBX Spring Adjuster
M1.5x10 O-ring
Insert Sealer O-Ring inside the Spring Adjuster Groove
TBX Shock Bottom Cap
Shock Bottom O-ring Guard
M2x6mm O-ring
TBX Piston [2 Holes]
Lightning12 TBX Shock Shaft
M1.5 E-Clip
TBX Shock Ball End
TBX Spring Retainer
A-02-VBC-5032 x 1
M1.0x7.5 O-ring
TBX Shock Thru Cap
M2x6mm O-ring
TBX Shock O-ring Guard
Lightning12 TBX Sping
[Gold/Medium]
C-02-VBC-5034
OPTIONAL LIGHTNING12 TBX SPRINGS :
C-02-VBC-5039 (Med. Soft/Silver)
C-02-VBC-5040 (Med. Hard/Black)
Note The Direction Of
O-ring Guard On Top