Lada Niva Manual - Maintenance
Page 25
Tail lights
To replace the bulb in the tail light turn off the
upper screws which secure the luggage
compartment lining, screw off nut 2 (Fig. 69) and
remove lens 3.
Fig 69. Tail light and number plate lamps.
1-
connector, 2- nut, 3- lens, 4-pin, 5- direction
indicator bulb, 6- reverse light bulb, 6- marker
light bulb, 8- stop light bulb, 9- number plate
lamp.
To replace the bulb in number plate lamp 9,
disconnect connector 1 and remove the holder with
the bulb.
To replace the bulb in the body
interior lamp. Carefully pull it out
The lamp is kept in the recess of the
centre pillar by two springs 4 (Fig.
70).
Fig 70. Interior lamp.
1-
lens, 2- bulb, 3- switch, 4
fastening spring.
Fuses
Fuses are installed in two blocks. The first
block contains a 16 A fuse (Fig. 71) and nine
8 A fuses. The second block contains four 8
A fuses and two 16 A fuses.
Fuses are held in the blocks by spring
contacts. The circuits protected by fuses are
listed in Table 6.
The electric circuits of ignition, engine
starting, alternator (except for the field
winding), headlight lower beam relay and
headlight upper beam relay are not
protected by fuses
.
Prior to replacement of a blown- out fuse, find out and eliminate the cause of trouble.
Fuse-Protected Circuits
Fuse No
amperage
in Fig 71
Protected circuit
Fuse No
amperage
in Fig 71
Protected circuit
1 (16 A)
Horns
2 (8 A)
Windshield wiper
Body interior lamps
Heater fan
Inspection lamp socket
Windshield washer
Cigarette lighter
Headlight wiper relay
step-light bulbs
3 (8 A)
LH headlight (upper beam)
Headlight upper beam warning
lamp
www.ladanivabelgium.tk
