V60G-HOME-I
User Guide
Vayyar Confidential
Page 18 of 19
3.2
Instructions for the Integrator
The OEM integrator is responsible for ensuring that the end-user has no manual instructions to
remove or install module.
3.2.1
OEM Integrators Notices
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. As long as this
condition above is met, further transmitter testing will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed.
IMPORTANT NOTE: In the event that this condition cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC/ISED authorization is no longer
considered valid and the FCC ID/IC number cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product (including
the transmitter) and obtaining a separate FCC/ISED authorization.
3.2.2
End Product Labeling
Visible area with the following: “Contains FCC ID: 2AHIS-V60G-HOME-I” and “Contains IC ID: 21498-
V60GHOMEI” (either in user-manual, on the package or the product case).
When the hosting device uses an electric-display in a product, it should be possible to display
electronically the FCC-ID.
3.2.3
OEM Manual Information that Must be Included
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user manual of the end product which integrates this
module.
The user manual for OEM integrators must include the following information in a prominent
location:
IMPORTANT NOTE: To comply with FCC/ISED RF exposure requirements, this device and its antennas
must not be co-located or used in conjunction with any other antenna or transmitter except under
the conditions shown in the FCC/ISED filing and/or in accordance with FCC/ISED multi-transmitter
product guidelines.