Vax W85-DP-E series, Руководство пользователя

Страница: 18 / 20

Getting in touch
Caution:
Always switch off and unplug the carpet washer from the electrical outlet before assembling, filling and emptying
the clean water tank, emptying the dirt water tank, or before connecting/disconnecting the attachments.
Caution: The carpet washer is a very powerful unit. Before plugging the cord into the electrical outlet, make sure all controls
on the unit are turned off. Hold the carpet washer firmly when starting and in use.
Important: Carpets should be dry vacuumed thoroughly before washing.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always
replace with a 13amp fuse.
• Make sure the clean water tank is fitted securely.
• The clean water tank valve may be stuck, hold the clean water
tank over the sink and press the valve underneath to release.
• Check the power brushes for blockages and clear.
• Check the belt. Go to ‘Replacing the belt or brushbars’.
• The float in the dirty water tank may have been activated.
Empty the dirty water tank wait for the float to settle before
re-starting your carpet washer.
• Check the dual spin power brushes for blockages and clear.
• The dirty water tank may not be fitted correctly, also make
sure the lid is pushed down securely.
• Check the nozzle for blockages and clear.
• The hose connector door may be open push to firmly shut
(some models only).
Solution Problem
Why won’t my carpet
washer turn on?
Why won’t the solution/
clean water dispense?
Why won’t my carpet
washer pick up?
Why won’t the
brushes spin?
What to do if it goes wrong