Vax VX36, Давайте начнем

Страница: 10 / 24

Using your machine Using your machine
IMPORTANT:
Never use the steam floor steamer without a microfibre cleaning pad attached to the floorhead.
Never leave the floor steamer in one spot for an extended period of time or with a damp or wet microfibre pad attached
as this may damage the floor surface.
CAUTION: This steamer is not free standing, always stand using the wall bracket or securely against a wall/fixed structure.
When the steamer is switched on the control panel will automatically set to max steam (no detergent).
Place the microfibre
pad on the floor white
side facing up. Place the
floor head onto microfibre
pad making sure the
microfibre pad covers
the entire floorhead.
Press the button in the
centre of the control
panel to select steam
and detergent setting.
The light will illuminate
at the desired setting:
Max steam
Low steam
Max steam + detergent
Low steam + detergent
Plug the steamer into
mains power supply and
slide the On/Off switch
to “On”.
Pull handle
backwards to recline.
The orange light will
illuminate to indicate
power on.
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the trigger
continuously to prevent
over wetting floors.
The green light will
illuminate to indicate
the steamer is ready
to use. The steamer
will automatically set to
Max steam (no detergent).
Move the steamer slowly
forwards and backwards
across the floor paying
particular attention
to high traffic areas.
Squeeze/release trigger
to release steam
as required.
Using the floor steamer
TIP