IMPORTANT:
Remove battery before carrying out any maintenance on your machine.
NOTE:
The dirty water tank has an automatic shut off to prevent the tank from overflowing. If this is
activated, the Floormate Cordless will not pick up and the sound of the motor will change. The dirty water tank
will need to be emptied.
IMPORTANT:
Empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not
leave solution stored in the tanks between uses.
Using your machine
Cleaning the filter
Remove dirty water tank
lid from dirty water tank
and lift float.
Pinch filter together to remove
from lid.
Rinse under water
(max. 40˚C) to remove
debris. Leave to fully dry
before replacing back into
your Floormate Cordless.
Emptying the dirty water tank
Taking care of your machine
Press the release button
on the dirty water tank.
Pull to remove tank.
Lift dirty water tank
clips up and outward to
release. Lift to remove
dirty water tank lid.
Empty dirty water over
the sink. Rinse dirty water
tank and lid under water
to remove debris. Replace
dirty water tank lid.
Tilt dirty water tank
and line up onto
Floormate Cordless. Push
until it clicks into place.