vax.co.uk
9
Looking After Your Machine – Brushbar
FAQs
Changing the belt
Switch off your vacuum
cleaner at the main socket
and unplug. Unclip the 2
small wheels from the base
of the vacuum to enable you
to remove the screws from
behind. Note: The screw for
the height adjuster dial is
located here.
Remove the 9 screws from
the base of the floorhead
cover.
Remove the floorhead cover.
Lift the brushbar from the
machine to remove the belt.
Note: To remove debris from
the brushbar see page 8.
Place the belt by attaching it to the
brushbar and hooking it onto the
metal side.
Once the belt has been replaced attach
the brushbar back onto the vacuum.
Attach the floorhead cover, 2 small
wheels and height adjuster dial by
screwing back into place.