Looking After Your Machine -
Removing Blockages
7
Re-setting the brushbar
Removing debris from the brushbar
A
RED
fl ashing light will indicate a
jammed brushbar.
To reset press the
RED
button in
the middle of the fl oorhead.
A
GREEN
fl ashing light indicates
no blockages in the brushbar.
Place the vacuum cleaner on
the fl oor upside down and
remove the screw on the
back of the brushbar cover.
Unclip both clips on the
brushbar cover.
Remove the brushbar cover
and remove and debris, hair
and dirt from the brushbar
and belt.
If the light continues to fl ash red after resetting, the brushbar may still be blocked. Using a pair of scissors, cut through any
threads or hairs caught around the brushbar. To access brushbar:
Press the brushbar reset
button again to ensure the
blockage is fully cleared.
Removing blockages from the TurboTool
1
2
3
IMPORTANT:
If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting
the vacuum cleaner.
NOTE:
Brushbar and belt are not removable
