Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
11
Maintenance
(Keep your Vax as good as new)
Replacing the hard water filter
Clearing blockages
Hard water filter in unit.
Steam exhaust vent.
Hard water filter removed.
Remove microfibre pad
and inspect unit base for
blockages. If a blockage
can be seen use a small
thin object such as a
paper-clip to try to free
blockage.
New filter.
If steam path is still
blocked, remove steam
mop floor head from main
body by pushing white
plastic locking pin and
pulling away.
Filter needs to be replaced.
After floor head is
removed, using a thin
object such as a paper-clip
(in the area shown),
attempt to remove the
blockage.
IMPORTANT:
The condition of the filter affects the performance of your machine.
Check and change filter (depending on level of use). Do not operate unit without hard water filter in place.
Your machine is fitted with a hard water filter. If you live in an area of hard water the filter will discolour/darken
over time (2). Depending on water hardness and/or frequency of use the filter should be changed every
12 months, or once the filter has completely darkened.
(2)
(1)
IMPORTANT:
Turn unit off. Allow unit to fully cool down before performing maintenance or troubleshooting checks.
There is a small opening at the bottom of the trim that goes around the outside of the back of the unit.
This opening is a steam exhaust vent should the primary path become blocked. If steam starts to escape from
this vent you should:
Содержание VSTDUET1600
Страница 2: ...Vax Service line AU 1300 361 505 NZ 0800 800 900 v...
Страница 15: ...05 0 vax com au 14 Notes...
