
WELCOME TO VAX’S WORLD
You have just purchased a product designed with the most up
to date technology, following international safety standards.
It is manufactured using the highest quality materials available
in the market.
To make proper use of your floor shining appliance, carefully
read the instructions of this manual.
Keep this manual in a safe place; it will prove helpful in case
of doubts.
Fig.1
ASSEMBLY OF THE MACHINE (see figure 1)
Remove the machine from its carton box and from the covering
plastic bag. Turn it upside down and remove the protectors
from the disks, turning the disk softly with your hand (figure 2).
Then grasp handle 1 and upper pipe 4, after removing the
screw. Introduce the pipe into the handle facing the screw
holes and join both parts, tightening the screw with a Phillips
screwdriver (+) as per figure 5.
In the same way, grasp lower pipe 5 and upper pipe with handle
and join both pipes with screw 16 (figure 6). Then place the
assembly on the crutch joining with screw 16 (figure 7). Grasp
cloth bag 10 by its nozzle, introduce it into the back of the
machine, lowering the lock which fixes the nozzle to the machine
and push until it engages (figure 8). Now raise the bag by its
closure 11 and engage the bag spring 12 to the cord holding
hook 3 affixed to upper pipe (figure 9). Finally, remove the
straps which hold together cord 8. Your machine is now ready
to work.
1
Floor Polisher - Model VS12
1. Handle
2. Handle screw
12. Bag spring
11. Bag closure
10. Dust collecting bag
3. Cord
holding hook
4. Upper pipe 1
5. Lower pipe 1
15. Light screen glass
7. Motor unit
16. Pipe-crutch screw
9. Bag nozzle
8. Power cord
6. Crutch
CHARACTERISTICS
Model:
VS12 chrome plated, with light
- Motor average working speed
7500 rpm
- Light bulb
10 Watt, 12 Volt
- External dimensions:
Height
965 mm (38 inch)
Depth
360 mm (14 inch)
Length
400 mm (16 inch)
Weight
7.5 kg (16.5 lbs)
2
Floor Polisher - Model VS12
Desengage
Fig.7
18. Caster
Engage
Protector
Fig.2
Fig.5
Fig.6
Fig.9
Fig.8
Insert
Remove
Nozzle
lock