Using your machine
Unhook the solution tube and insert
into the solution bag. Solution only
dispensed with the trigger handle,
lance and solution nozzle, or car/
outdoor/rotary brush if supplied.
Switch the machine on and squeeze
trigger to dispense the water and
solution mix.
After use rinse the pressure
washer to prevent blockages.
Inset the solution tube into a bucket
of fresh water (Max 40�C), turn
the machine on and squeeze the
trigger for 1 minute.
Using solution with your pressure washer
IMPORTANT:
When using solution make sure you follow the dilution instructions and use Vax solution only.
IMPORTANT:
Always make sure the solution tube is fully submerged into the solution/watermix inside the
solution bag.
CAUTION
Solution can only be used when the solution nozzle or car/outdoor brush nozzle is attached.
Solution cannot be used with Jet and Turbo Nozzles.
To attach the solution nozzle, fit the
lance with a firm push and twist
clockwise to lock into place.
Hold down the release button on the
lance, push the solution nozzle and
lance firmly together until you hear an
audible CLICK. Release the button and
gently pull the solution nozzle to make
sure it is locked secure before use.
To remove hose,
lance, nozzle or
accessories always
squeeze trigger until
water stops to release
pressure build up.
