Attach the hose connector to water
inlet by turning clockwise until tight.
Slot the handle in to the top of the
machine and insert the 2 screws,
turn clockwise to tighten.
Align the pressure hose and cord
storage hook onto the back of the
machine and secure with 2 screws.
Assembling your pressure washer
Preparing your pressure washer for use
Always make sure the pressure washer and water supply is off before connecting or disconnecting the hose
and accessories. The pressure washer is equipped with a thermal cut-out. If for any reason the pressure washer does
overheat the thermostat will automatically turn the washer off. If this happen switch and unplug from the electrical socket.
Remove the lance, nozzle and filter and check for blockages. Allow the pressure washer to cool for approx 4 hours
Always check water hose, pressure hose, lance and accessories are not damaged broken or worn before use.
Push the pressure hose
firmly to the water outlet
and turn the pressure hose
collar clockwise until tight.
LOCKED
UNLOCKED
A trigger safety lock is located
underneath the handle. The safety lock
should always be in LOCKED position
before connecting/disconnecting the
pressure hose to the trigger handle.
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
IMPORTANT:
Always make sure the trigger safety lock is in the LOCKED position when not in use or connecting
/disconnecting the pressure hose.
To connect pressure hose to trigger
handle, press the pressure hose release
button and push pressure hose to lock
into position. Gently pull the pressure
hose to check the connection.
Never use the turbo
nozzle on cars,
tyres and engines.
CAUTION