Vax VHFM700, Руководство пользователя

Страница: 8 / 16

Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
7
Operation
Emptying the Recovery (Lower) Tank
To remove tank, press
down on release
button (A) and pull tank
straight out. Remove tank lid (A).
Empty tank.
An automatic suction shut-off is built into the recovery tank to prevent the tank from overflowing.
When the shutoff activates, the cleaner will not pick up debris and the sound of the motor will
change. The recovery tank is full and must be emptied.
Turn cleaner off and disconnect from electrical outlet.
Although not necessary for satisfactory performance, it is recommended that the recovery tank
be emptied after dry vacuuming and before wet operation. Check the solution tank also. It may
need to be refilled at this time.
FIG. 4/10 FIG. 4/11
Your cleaner may also be used to pick up small liquid spills (max 5mm in depth) on non-carpeted
floors. Turn Mode selector dial to the WET PICKUP position and release the trigger. Continue to
move cleaner over the area to pick up the spill.
IMPORTANT:
Do not use the cleaner to pick up flammable or combustible liquids or
chemicals. Do not use the cleaner to pick up detergents that contain solvent based ingredients.
Picking Up Spills