Vax VCST-01, Руководство пользователя

Страница: 7 / 20

6
STARTING UP
6.1
Preparing the vacuum cleaner
The appliance is supplied and equipped with a microfibre filter (P)
which is already assembled.
WARNING: For safety reasons, the handgrip (T) can be released only
if the quick connector (24) is not inserted.
•
Lift the safety cover (V) (picture 2)
•
Attach the quick connector (24) of the hose by pressing the front
button (25) into the steam socket (W) (picture 3)
•
Make sure it is properly fastened: button 25 should return to its
initial position; once in position it should click
•
Plug the power cable (B) into an appropriate 240V socket
provided with an earthing system
•
Press the main switch (D); the pilot light (H) will come on
picture 1 picture 2 picture 3
6.2
Starting up the boiler
CAUTION! When preparing the appliance for use, switch it off and
unplug it.
WARNING: The appliance must be placed on a horizontal flat surface.
We recommend using demineralized or distilled water to prevent lime
scale deposit in the boiler. Do not add any type of detergent or
chemical substance to the boiler tank water.
•
Remove the boiler water tank cap (C) (picture 4)
•
Fill the boiler tank (max 1.2 litres) with water using the recharging
automatic valve bottle (19a) (picture 5) which stops the water
supply when the boiler water tank is completely filled. (picture 6)
•
Put on the boiler water tank cap (C)
picture 4 picture 5 picture 6
6.3
Replacing the filter
•
Press the two buttons (U) located besides the handgrip (T) down
completely (picture 7)
•
Lift up the handgrip (T)
•
Lift up the handle (N) and remove the machine tank (M) (picture 8)
•
Turn the machine tank handle (N) over and pull the filter assembly
with float (O) up/forward (picture 9)
•
Replace the filter (P) or (Q)
•
Fit the lower filter cover (S) completely (picture 10)
•
Fit the solids filter (R) completely along with the curved ends
(picture 11)
•
Make sure the unit is properly assembled; check if the filter, lower
filter cover and solids filter are completely and properly fitted
•
Put back the filter assembly with float (O) in the tank (M)
•
Keep the handgrip (T) lifted and reposition the machine tank
(M) on to the appliance
•
Lower the handgrip (T)
•
Close the handgrip (T) by pressing downwards and making sure
that the buttons (U) return to their initial position properly.
Once in position it should click
7