Vax V-2400C Скачать руководство пользователя страница 7

Страница: 7 / 12

---

vax.co.uk

Maintenance

(Keep your Vax as good as new)

Clearing blockages

WARNING:

To reduce the risk of electric shock, the power cord must be disconnected before performing

maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket.

Hose blockages

The flexible hose may be disconnected from the

vacuum cleaner. Carefully remove any blockages found

and reconnect the hose securely.

Switch the vacuum cleaner off and disconnect the power plug from the

electrical outlet.

Lay the Turbobrush on a flat surface and turn over to expose the

brushbar. Using a pair of scissors, cut through any threads or hairs

caught around the brushes and brushbar.

Accessory blockages

Remove accessory from the hose/telescopic tube.

Carefully remove the blockage and return to the cleaner.

Removing blockages from the TurboTool

Turn the TurboTool over and

slide off the locking ring.

Removing blockages from the Turbobrush

Detach lower housing and

remove blockage.

To re-assemble the TurboTool,

ensure that the tabs are engaged

and pivot the lower housing

closed. Slip the locking ring over

the neck of the TurboTool and into

the groove to finish.

C88-VC-T-A V-2400C User Guide v1.0.qxd:User guide 2/9/11 14:31 Page 7

Содержание V-2400C













Результаты поиска

Содержание V-2400C

Отзывы:

Бренды по названию

Популярные бренды

Vax V-2400C, Руководство пользователя

Результаты поиска

Содержание V-2400C

Отзывы:

Бренды по названию

Популярные бренды