![background image](http://html1.mh-extra.com/html/vax/v-2000-u/v-2000-u_user-manual_4232134007.webp)
Maintenance
(Keep your Vax as good as new)
vax.co.uk
7
NOTE:
Loop the new belt first over the motor drive shaft and then over the brushbar. Insert the
right side of the brushbar first then the left. Ensure brushbar is entered completely before replacing
vacuum head and replacing the five screws.
Changing the belt
Removing blockages from the brushbar
IMPORTANT:
If the
problem persists then
follow instructions above to
gain access to the brushbar.
Removing blockages from the TurboTool
!
WARNING:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug
from the electrical outlet before performing any maintenance/troubleshhooting checks.
!
Remove
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect
the hose securely.
U90-VU-Series User Guide:User guide 24/11/2009 13:18 Page 7